rods»view/87

Status Summary for ROD ID 87

<<Prev | Next>>

Test NameStatusNotesModified
Board Status 1 Will QPLL lock internally with FSEL set to 000011 -JH 5/6/08 Fixed; found that R37 10k resistor was missing. -AC 5/2/08 5V line is drawing ~0A with no proms loaded,did not proceed -Bill 08/02/14. During initial testing the top failed the DRAM test. With CGs new mig and ise 10.1 both the bottom and top passed full DRAM tests (27/05/08 alex). 22-07-2008
fuses 1
18-06-2008
U31 1
18-06-2008
U32 1
18-06-2008
U33 1
18-06-2008
U34 1
18-06-2008
U35 1
18-06-2008
U81 1
18-06-2008
U82 1
18-06-2008
I5V_initial 1
18-06-2008
I3V initial 1
18-06-2008
proms load 1
18-06-2008
I5V proms 1
18-06-2008
I3V proms 1
18-06-2008
V4T temp 1
18-06-2008
V4B temp 1
18-06-2008
connectivity 1
18-06-2008
loop data 1
18-06-2008
slink 1
18-06-2008
dram 1
Top fails, bottom passes short test.  With CGs new mig and ise 10.1 both bottom and top passed full DRAM test (27/05/08 alex).
18-06-2008
nse communication 1
18-06-2008
sram
18-06-2008
optical loop 1
18-06-2008
patch panel 1
Fine Top and Bottom have buffer errors on all 4 GOLs once GOL IDLE is turned off.
18-06-2008
qpll lock 1
18-06-2008
ttc connectivity 1
18-06-2008
test fifo 1
18-06-2008
ddr reset
18-06-2008
assembly 0
Found that R37 10k resistor was missing.
18-06-2008