Test Name | Status | Notes | Modified |
---|---|---|---|
Board Status | 1 | When powered on it showed that VME was constantly being accessed, even if not in crate. Upon reloading VChip prom board returned to normal operation. Possible corrupted prom (either during loading or while in chip). -AC 6/20/08 Retested, found no problem. -AC 5/30/08 Replaced QPLL Crystal X3, still unable to get a qpll lock to TTC. Gets internal lock just fine. -AC 5/2/08 | 22-07-2008 |
patch panel | 1 | 10-11-2014 | |
U35 | 1 | 20-06-2008 | |
U81 | 1 | 20-06-2008 | |
U82 | 1 | 20-06-2008 | |
I5V_initial | 1 | 20-06-2008 | |
I3V initial | 1 | 20-06-2008 | |
proms load | 1 | 20-06-2008 | |
I5V proms | 1 | 20-06-2008 | |
I3V proms | 1 | 20-06-2008 | |
V4T temp | 1 | 20-06-2008 | |
V4B temp | 1 | 20-06-2008 | |
connectivity | 1 | 20-06-2008 | |
loop data | 1 | top fails, bottom passes 100k. Passed 10k top and bottom loop data test and passed 100k top and bottom rod_dual_board_test_log. Looking at the old loop data log file I suspect the original error was a problem with the test operation (31/5/08 alex). | 20-06-2008 |
slink | 1 | 20-06-2008 | |
dram | 1 | With V4 v3.16 27/05/08 bottom and top both passed (31/5/08 alex). | 20-06-2008 |
nse communication | 1 | 20-06-2008 | |
sram | 20-06-2008 | ||
optical loop | 1 | 20-06-2008 | |
qpll lock | 1 | 20-06-2008 | |
ttc connectivity | 1 | 20-06-2008 | |
test fifo | 1 | 20-06-2008 | |
ddr reset | 20-06-2008 | ||
assembly | 1 | 20-06-2008 | |
fuses | 1 | 20-06-2008 | |
U31 | 1 | 20-06-2008 | |
U32 | 1 | 20-06-2008 | |
U33 | 1 | 20-06-2008 | |
U34 | 1 | 20-06-2008 |