rods»view/10

Status Summary for ROD ID 10

tickets

<<Prev | Next>>

Test NameStatusNotesModified
Board Status 1 Top DDR fixed -- R28 DC-DC converter set resistor was broken off. Board is operational in USA15 so is considered to have passed all tests, this might need to be verified at some point (alex 7/5/08).Could not load vchip v2.08 via xsvf in e-02. After running rod_loop_data_test (and ddr test) it was found that the top ddr does not initialise correctly, therefore not data from the top half. Bottom working correctly (17/5/08 alex). While running NSE tests this ROD only reported 118 channels, possible testfifo-V2 solder fault (alex 13/01/10). 03-07-2008
assembly 1
R28 repaired (CG). Also, Ben soldered in the missing 4-colour LEDs
05-07-2008
fuses 1
17-05-2008
U31
17-05-2008
U32
17-05-2008
U33
17-05-2008
U34
17-05-2008
U35
17-05-2008
U81
17-05-2008
U82
17-05-2008
I5V_initial
17-05-2008
I3V initial
17-05-2008
proms load
17-05-2008
I5V proms
17-05-2008
I3V proms
17-05-2008
V4T temp
17-05-2008
V4B temp
17-05-2008
connectivity 1
17-05-2008
loop data 1
Tested while in USA15.  Bottom passed full test.  Only small test performed on top as it appears the top ddr does not initialise correctly.
17-05-2008
slink 1
17-05-2008
dram 1
Tested while in USA15. Bottom passed full test. Only small test performed on top as it appears the top ddr does not initialise correctly.
17-05-2008
nse communication 1
17-05-2008
sram
17-05-2008
optical loop 1
17-05-2008
patch panel 1
17-05-2008
qpll lock 1
17-05-2008
ttc connectivity 1
17-05-2008
test fifo 1
17-05-2008
ddr reset
17-05-2008
assembly 0
Resistor R28, which handles the top DDR power, was broken during board insertion. The date is a guess based on the earliest reported error date.
01-03-2008